REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for a highly motivated, hand-on system Senior Engineer/Engineer who will be responsible for the Mechanical/HVAC systems. Responsibilities: • Responsible for the operations and maintenance of mechanical systems in Cells and Modules divisions. • Follow up on mechanical systems – including but not limited to HVAC, acid / general / silane / VOC / NOx exhausts, scrubbers, CDA, waste water drains and PCW. • Lead and oversee Projects relating to upgrading / improvement / cost saving of systems in REC where needed. • Conduct monthly meetings to review key KPIs with vendors. • Monitor & supervise vendors to ensure compliance of work in accordance with the PM plan and project schedule. • Conduct frequent site inspections and attend site meetings to ensure high quality standard work and timely delivery in accordance to schedule. • Responsible for general on-site technical & engineering matters relating to mechanical systems. • Resolve any unexpected technical difficulties and other problems that may arise. • Attend daily meetings and prepare weekly and monthly reports. Ensure that mechanical spending is within budget. • Other adhoc duties as assigned by reporting supervisor.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for a highly motivated, hands-on Instrumentation and Control Engineer / Senior Control Engineer who will be responsible for all Facilities Control & ELV systems (FMCS,LSS,DIW,CDS,GDS, ELV). Responsibilities: • Provide engineering expertise and support for safe and reliable Facility operations, maintenance work and projects with regards to I&C and ELV systems. • Review daily / monthly alarm history in all SCADA and ELV systems and provide necessary improvement, corrective and preventive actions. • Perform all the instrument calibration when necessary. Maintain, keep and ensure all the systems back up / records are up to date and ready. Perform control system field termination, configuration and troubleshooting when necessary. • Oversee and manage contractors on predictive and preventive maintenance, FAT, SAT, etc. Review of diagnostic and system performance reports / logs for ELV, PLC & SCADA systems and make necessary recommendation for improvement / rectification. • Familiar with Siemens S7 PLC systems, WinCC and HMI. Good technical knowledge on E+H, Emerson, Vaisala and other process instruments would be an advantage. • Act as lead & point of contact for all I&C & ELV (in coordination, execution, testing, service maintenance, meetings with back end office, customers and vendors) projects and related works. Assist in procurement (review vendor quotes, meeting budget, documents & drawings for compliance with project requirements). Ensure that all materials used and work performed is as per specifications. • Participate in all continuous improvement key project such as cost reduction, manufacturing analysis, improvement of conversion cost, system improvement, Facilities CapEx improvement, new facilities system development and qualifications, etc. • Perform feasibility studies on Cells and Modules new facility equipment installation and make recommendation for future manufacturing expansion plans where required. • Prepare all required specification, operating procedure and working instructions and ensure all documentation are properly updated and maintained • Maintain and administer Incident report and 3D or CAR follow up. Conduct incident or accident investigation process including root cause analysis and ensure corrective actions are completed • Comply to Environment , Health and Safety requirements. • Other ad hoc duties as assigned by reporting supervisor.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
We are looking to hire a highly motivated, hands-on supply chain engineer who will be responsible to plan, source, evaluate, purchase and execute purchase orders to support Operations in most cost effective manner. Key responsibilities include inventory management, review of material forecast and driving cost savings initiatives related to the manufacturing of REC product. Responsibilities Manage purchasing cycle including request for quotation, PO creation, PO follow up, goods receipt and supplier billing. Solicit competitive quotations per requirements with negotiations with suppliers for contracts, favourable commercial terms & conditions and pricing. Collaborate with requestors and suppliers to resolve issues related to requirements, substitutions, priorities, damages, quality, delivery and other important terms & conditions. Manage material forecast and respond to short term sudden pull-in for urgent production needs and monitor usage abnormality. Generate plan of raw materials requirements to ensure prompt delivery and fulfillment of customers’ orders. Plan, execute and analyze materials requirements and reschedule plans. Highlight raw material issues or delays to Production Planner and Procurement Manager. Monitor, review and work to maintain optimum inventory level of raw materials and ensure safety inventory level is met. Sourcing for new suppliers and manage cost savings and cost reduction initiatives. Manage raw materials obsolescence, slow moving stock and excess inventory for disposition. Monitor supplier performance and ensure alignment with KPIs. Handle miscellaneous projects as and when necessary.   Requirements Degree in Supply Chain, Engineering or other disciplines Candidate with 2~3 years of relevant working experience will be preferred Proficient in MS office applications Prior experience in ERP software like IFS, SAP or Oracle Strong interpersonal and communication, negotiation and analytical skills Strong analytical and problem-solving skills-ability to collaborate with and motivate key players to achieve desired results in a professional manner Dynamic, independent, good team player & committed with proactive working attitude Good English writing & communication skills Good command of Mandarin to liaise with mandarin-speaking business associates   Others Perform other duties as assigned. Duties will arise from new requirements of business needs. Duties will vary according to the competence level on individual level.  
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries. Responsibilities: Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.  Support production line issues with appropriate and permanent corrective solution, as and when necessary.  Client representative in improvement/R&D projects to secure value added results and efficient implementation. In plant launch phase, work closely with process specialist/equipment/technologist and contribute to establish good product quality and specification.  Support investment proposals and projects in order to utilize best available practice and competence.  Support managements’ directives and projects as and when needed.  Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.   Cell PD Engineer Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.  Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.   Module PD Engineer Candidate working in Module PD is responsible for design and development of mechanical parts of a PV module structure Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets. Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, Corner Key, etc.) to meet the overall process, production and cost improvement targets.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for highly motivated, hands-on Equipment Engineer who will be responsible for equipment stability and improvement of tool assigned, with the ability to train and groom the maintenance team to highest level of technical competencies and supporting the strategic ambition to be the world’s leading solar cell producer.   • Reports to Senior Manager, Equipment and Maintenance Engineering • Oversee and be accountable for the maintenance of production equipment in the plant and drive for continuous improvement by implementing up-to-date methods to achieve the department goals set by the management. • Oversee the work of the maintenance team.   • Establish and implement all Equipment specification, troubleshooting procedures, and ensure compliance with corporate requirements and procedures • Maintain optimum utilization of equipment and resources and constantly review methods to reduce tool downtime, increase equipment throughput, achieve or exceed safety and equipment maintenance KPIs • Lead troubleshooting of equipment problems and apply Root Cause Analysis practices to equipment failure investigations. • Liaise with equipment vendors and spare parts suppliers continuously to develop new methods to achieve low cost maintenance system. • Improve the useful life of plant, equipment and machinery   • Work closely with manufacturing engineer, process engineers, planners, buyers and equipment vendors to resolve equipment related issues to improve key equipment indices at the assigned area. • Formulate with process engineering team on equipment control procedures and drive maintenance team to ensure the equipment are in control using SPC and other methodologies   • As an individual contributor, will be accountable for projects/programs as well as, developing methods and parameters, project methodology and/or project proposals. • Responsible for project costing and control related to equipment. Also performs other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the division. • Participate actively or lead in key project such as cost reduction, yield improvement, Cpk. improvement, new machine qualification, process optimization, cycle time improvement and new parts evaluation/qualification • Incorporate efficient methods of maintaining new equipment or plant, and may be involved in the installation and commissioning process. • Ensure compliance with company Lean Maintenance strategy and initiatives   • Drive the team of Technicians to participate in all continuous improvement projects related to cost, quality & service using Six-Sigma, Gemba, Kaizen or similar applicable methodology • Coaches, mentor and conduct training for targeted organizations on equipment engineering systems. • Participate in cross-functional teams on various improvement projects 
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking to hire a highly motivated TPM/ Engineer who will be responsible for the Manufacturing and Equipment Engineering function of our REC Modules plant supporting the strategic ambition to be the world’s leading solar cell producer. Responsibilities: • Reporting to the Manufacturing Manager • Oversee the SMT/TPM activities, drive for continuous improvement by implementing up-to-date methods, to achieve the manufacturing goals set by the management. • Lead and participate in TPM AM, PM, QM pillar teams to shift to achieve the long term goals of TPM. • Implement line operational procedures, and ensure compliance with corporate requirements and procedures • Implement efficient Manufacturing System with high productivity • Maintain optimum utilization of equipment and resources and constantly review methods of WIP management and production flow. • Ensure the processes are in control using SPC • Involved in daily line sustaining troubleshooting on process and quality related issues. • Manage all non-conformance material and scraps disposition as according to the process control procedures and quality related procedures. • Participate actively in key project such as cost reduction, yield improvement, Cpk. improvement, new product / process development, new machine qualification, process optimization, throughput improvement and new material evaluation/qualification • Drive the team of operators in the SMT to participate in all continuous improvement projects related to cost, quality & service using Six-Sigma, Gemba, Kaizen or similar applicable methodology • As an individual contributor, may be accountable for projects/programs as well as, developing methods and parameters, project methodology and/or project proposals. • Perform other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the division. • To observe and abide to all Environmental Health and Safety related rules and procedures in compliance to the Environmental Health and Safety policy. • Coaches, mentor and conduct training for targeted organizations on the manufacturing systems
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: • Provide thorough engineering research and evaluation in energy yield performance of PV products and systems components. • Develop mathematical models and prediction of energy production in PV system. • Perform failure analysis and research into phenomenon as well as developing a solution. • Work together with cross functional team members to develop product designs for current and targeted new market segments. Responsibilities: • Analyze weaknesses in current products. • Develop and build & test prototypes of improved and new module designs. • Assess energy production models using simulation packages such as PVsys.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: • Work with Project teams and Operations to ensure timely completion of qualification requirements. • Develop test methodologies and have good insight to industry test standards for PV products. • Identify industry trends and translate actions necessary for inputs to new developments. • Develop and research into testing regimes for product reliability. • Support maintenance and quality documentation for Lab’s tools and set up. Responsibilities: • Review test data of testing regimes. Providing timely engineering inputs including failure analysis reporting when required. • Knowledgeable on standards and its developments for both products and components. • Manage testing activities and able to perform project management work effectively. • Able to communicate & comment well on products’ performance. • Ensure closure of activities and actions required by Certification bodies and or internal/ external customers. • Provide necessary support and answers for questions from production operations as well as to Sales and Marketing.  
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: • Manage the suppliers to ensure that materials supplied by the suppliers are meeting the company’s expectations. • Set up and maintain the quality controls in the production line • Set up and establish outgoing quality assurance Responsibilities: • Supplier Management − Manage the qualification of new materials/suppliers. − Manage the incoming quality of the materials − Drive supplier quality through audits to ensure conformance to specification and continuous improvement in system, procedures and processes. − Drives supplier performance through efficient rating system and reviews. • Change Control − Support product qualification process (Provide quality requirements in FMEA, SPC, DOE, Control plan and other processes and procedures as required) • Quality Assurance Planning − Establish and monitor Statistical Process Control (SPC) in the line to drive improvement of process and product quality − Benchmark, develop and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings. − Non-conforming materials and products management • Quality Management System − Participate in internal quality audits to drive conformance and continuous improvement in product quality − Manage • Safety - The KPI is zero safety cases. − Comply with the company’s safety protocol at all times. • Training / Coaching. − Support training and coaching activities as part of organizational competency development • Communication and Presentation. − Ability to communicate and present at all levels of the organization. • Others − Perform other duties as assigned − Duties will vary according to the degree of difficulty and involvement of the specific targets set in the department
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for a highly motivated, individual as Planning Analyst for customer order fulfillment focus. She or He will have to manage customer account on shipment plan. The candidate has to understand what are the factors for the gap in term of watt class distribution, he/she has to work closely with Module/Cell planners on wafer/cell loading strategy to meet the customer demand. The candidate is able to explore ways to minimize production time and costs, efficiently organize the use of resources and maximize efficiency in the workplace.   Responsibilities: • Participate in Safety (HSE) and 5S procedures. • To plan and bridge cells and modules production so as to fulfill customer requirements • To align both wafer loading and cells loading • To inform CLC team of daily planned production numbers to ensure customer orders are met on a weekly basis • To come up with a delivery plan based on production plan and demand by customer • Weekly inventory reporting • Coordinate and work closely with all relevant departments to align all KPIs • To monitor and feedback on cells and modules weekly forecast accuracy and short-term customer delivery fulfillment • To forecast production output accurately for the next 4 weeks • To draw data from SAP and MES systems • To come up with solutions to mitigate deviations from plan
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary:  Logistic Engineer is required to lead & drive improvement for logistic operation planning, control,  FIFO methodology, cycle time management, productivity improvement and TPM. He/She is to ensure materials flow management, inventory accuracy, manning optimization and storage space management in place to achieve organization goals.  Responsibilities: • To lead and drive for continuous improvement in materials flow, manning, space and inventory management. • Track records of cost reduction achievement • Write SOP & WI required for warehouse management and logistic operations. • To perform risk assessment together with HSE department and ensure safety first for operation. • Setup a system for effective and efficient logistic operation and inventory management. • Strike for improvement of Safety, Quality, Cost and Cycle time to achieve world class logistic operation. • Focus on 5S, visual management and inventory accuracy improvement. • Must be highly energetic and have the drive to get things done ahead of plan. • To lead and implement SFM by setting direction and strategies in relation to different SFM blocks.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: Logistic Supervisor is required to lead team to drive improvement for logistic operation planning, control, FIFO methodology, cycle time management, productivity improvement and TPM. He/She is to ensure materials flow management, inventory accuracy, manning optimization and storage space management in place to achieve organization goals. Responsibilities: • To lead and drive for continuous improvement in materials flow, manning, space and inventory management. • Track records of cost reduction achievement • Write SOP & WI required for warehouse management and logistic operations. • To perform risk assessment together with HSE department and ensure safety first for operation. • Setup a system for effective and efficient logistic operation and inventory management. • Strike for improvement of Safety, Quality, Cost and Cycle time to achieve world class logistic operation. • Focus on 5S, visual management and inventory accuracy improvement. • Must be highly energetic and have the drive to get things done ahead of plan. • To lead and implement SFM by setting direction and strategies in relation to different SFM blocks. • Ensure delivery of Raw materials to manufacturing per Kanban request • Ensure on time delivery of Finished goods – loading for export to meet shipment • Supervise, motivate and train Materials handler • Manage Welfare, OT and attendance. ** Must be able to perform 12-hr rotating shift
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: A matured individual with good data management and analytical skill to support the department to achieve company key yearly project and cost goals. The position requires the aptitude to systematically compile and record in details various cost and projects, he/she is expected to continuously design and improve work flow and tools to generate reliable reports. Responsibilities: • Safety Participate in activities and projects related to safety improvement processes. Must have a respectful mindset for REC regulations and procedures. • Quality Have a quality product mindset when working on cost files. • Projects Support project managers with administration and supportive tasks for various projects, create tracking systems of required information, update tracking systems, document control tasks, invoice administration, contract and other documents administration, filing and other tasks appropriate to support project management and project controls. • Document Management System (DMS) Review and ensure document format and content adhere to DMS requirements. Maintain document master list and archives. Support document requests in accordance to DMS document release protocols. • Delivery. Live REC values of being Responsible, Experienced, Collaborative and Straightforward in deliverables having speed in mind. • Multitasking Must be able to handle working on several requests and on several types of tasks, not just focusing on one area. • Continuous Improvement Participate in REC Business System (RBS) projects. • Others Perform other duties as assigned.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for highly motivated, process technician hands-on with good ethics and dedication to be responsible for the routine activities of REC Modules plant to support plant strategic objectives and goals set, and proactively participate in improvement activities to achieve high standard manufacturing facility in REC Solar. Responsibilities: • Perform daily process activities according to procedures set • Observe a high standard of safety and housekeeping procedures • Ensure optimum utilization of equipment • Participate proactively in continuous learning and improvement activities • Participate actively in key project such as cost reduction, yield improvement, Cpk improvement, new product/process development, new machine qualification, production optimization, cycle time improvement and new material evaluation/ qualification • To achieve all KPIs set by the Process Engineer • Perform other duties as assigned– duties will vary according to the project progress and/or the specific goals of the division
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Summary:  We are looking to hire highly motivated, hands-on Shift Technicians who will be responsible for the Maintenance or Preventive Maintenance (PM) function for facilities systems of REC module plant supporting the strategic ambition to be the world’s leading solar cell producer. Responsibilities:  Perform facilities system troubleshooting or PM on shift.  Revise all PM specification and procedures with the respective Engineer.  Handle operation and maintenance of various mechanical and electrical systems & services.  To assure continuous reliability of the facilities systems to achieve zero interruption to production.  Perform Total Preventive Maintenance (TPM), Preventive Maintenance (PM), and PDM (Predictive Maintenance) activities as according to schedule planned by the respective Engineer.  To ensure the systems are well maintained.  Participate actively in key project such as cost reduction, system improvement, Cpk improvement, new equipment system development and qualification, new material evaluation/qualification, etc.  Performs other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the division.  
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for Production Specialists who are honest, hardworking and good learners to ensure accurate and proper execution to the required Work Instructions and Standard Operating Procedures in the work areas. Responsibilities: Safety  Remember and follow all safety procedures in assigned work areas. If a safety deviation is observed, report immediately to Team Leader. Quality  Remember and follow all work instructions (WI) and SOP in assigned work areas. Follow any new WI and SOP if there are changes. If any deviation is observed, report to Team Leader immediately.  Cost  Understand any changes to the decisions relating to projects in cost; yield improvement/efficiency, new material evaluation. Execute decisions made in relation to the decisions of the projects.  Delivery.  When given opportunity, participate in projects which involve improving production efficiency and cycle time. Follow required cycle time in each work station. Report any issues relating to cycle time to Team Leader. Training / Coaching.  Be trained in the required competencies and be certified in each of the required competencies. Management.  Good personal management in meeting line targets by good performance and good attendance. If called upon to do over- time, be willing to help to meet line targets.  Continuous Improvement  Relevant opportunities may be given to participate in projects such as 5S, Shop Floor Management, Total Preventive Maintenance, and others. Depending on individual capabilities, participation will be requested.  Others  Perform other duties as assigned. Duties will arise from new requirements of business needs. Duties will vary according to the competence level on individual level.  
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary:  Looking for Quality Specialists who are honest, hardworking and good learners to ensure accurate and proper execution to the required work instructions and standard operating procedures in the work areas. Responsibilities: Safety  Remember and follow all safety procedures in assigned work areas. If a safety deviation is observed, report immediately  to Team Leader. Quality  Remember and follow all work instructions (WI) and SOP in assigned work areas. Follow any new WI and SOP if there are  changes. If any deviation is observed, report to Team Leader immediately.  Cost  Understand any changes to the decisions relating to projects in cost; yield improvement/efficiency, new material  evaluation. Execute decisions made in relation to the decisions of the projects.  Delivery.  When given opportunity, participate in projects which involve improving production efficiency and cycle time. Follow  required cycle time in each work station. Report any issues relating to cycle time to Team Leader.  Training / Coaching.  Be trained in the required competencies and be certified in each of the required competencies.  Management.  Good personal management in meeting line targets by good performance and good attendance. If called upon to do over- time, be willing to help to meet line targets.  Continuous Improvement  Relevant opportunities may be given to participate in projects such as 5S, Shop Floor Management, Total Preventive  Maintenance, and others. Depending on individual capabilities, participation will be requested.  Others  Perform other duties as assigned. Duties will arise from new requirements of business needs. Duties will vary according to  the competence level on individual level.  
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary:  On time delivery of materials or finished goods to the customer, internal and external, with proper execution of work instruction and standard operating procedures in a safe  and high quality level, at optimal cost. Responsibilities: Safety  Remember and follow all safety procedures in assigned work areas. If a safety deviation is observed, report immediately to Team Leader. Quality  Remember and follow all work instructions (WI) and SOP in assigned work areas. Follow any new WI and SOP if there are changes. If any deviation is observed, report to Team Leader immediately. Ensure material were issue with correct part number and batch number according to the first-in-first-out(FIFO) basis.  Cost  Ensure inventory is accurate and correct. Waste may be in different form. For eg: defects, overproduce, idle. Ensure zero waste mindset in the course of work. Understand any changes to the decisions relating to projects in cost; yield improvement/efficiency, new material evaluation. Execute decisions made in relation to the decisions of the projects.  Delivery.  Ensure material or finished goods are delivered according to the schedule Ensure material issued and received in accordance to the allowable duration Ensure material supplied on time for production line continuation Training / Coaching.  Be trained in the required competencies and be certified in each of the required competencies.  Share best practice to team members to enhance team competency level To train new team members if assigned Management.  Good personal management in meeting department KPIs with good performance and good attendance. If called upon to perform duty coverage, be willing to help the team to meet KPIs.  Continuous Improvement  Relevant opportunities may be given to participate in projects such as 5S, Shop Floor Management, Total Preventive Maintenance, and others. Depending on individual capabilities, participation will be requested.  Others  Perform other duties as assigned. Duties will arise from new requirements of business needs. Duties will vary according to  the competence level on individual level.  
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Full Time Apply Now
Summary: We are looking for a highly motivated, independent individual to fill these job roles: • Responsible for supporting laboratory works related to module reliability testing. • Manage traffic activities for all inbound/outbound modules / samples for reliability testing • Assist in perform tests outlined by Engineer which includes (but not limited to) mechanical load tests, EL, power determination using sun simulator, LID, chamber tests & insulation tests. • Assist in the documentation of experimental results and day-to-day operations to ensure that laboratory work processes can be carried out smoothly and safely. • Initiate, participate and implement continuous improvement measures and analysis to improve the service to internal customers (e.g. Engineering, R&D and etc.) • Undertake any ad-hoc duties assigned by Engineer.   Responsibilities: • Direct the flow of test modules/samples from storage area to laboratory and vice-versa base on schedule. • Carry out physical testing of modules/samples. • Must be able to communicate experimental results/observations to peers and record through verbal communication and/or test report. • Preparing and submitting samples for physical and analytical testing. • Ensure that test modules received (external or internal) are with necessary paperwork is in accordance to system requirement. • Housekeeping of laboratory premise and ensure high standard of 5S. • Comply to Environment, Heath and Safety requirements. Report any hazard / incident immediately to the immediate supervisor. • Comply to Quality Assurance and Quality control procedures. Report any non-conforming parts to immediate supervisor. • Ensure ethic rules & regulations are complied.
REC Solar Pte Ltd
D22 Boon Lay, Jurong, Jurong Island, Tuas
Permanent Apply Now
We are looking for Quality Specialist who are honest, hardworking and good learners to ensure accurate and proper execution to the required Work Instructions and Standard Operating Procedures in the work areas.   The position will be responsible for ensuing out-going quality assurance on the finished products through product audit and out-going visual inspections.